QM INDUSTRIES QAMC15A075SO Cartridge Unit Bearings

Da max.:677 mm; Operating clearance factor k2:0.11; Fatigue load limit Pu:530 kN; ra max.:5 mm; Limiting speed:900 r/min; Ca min.:2.3 mm; Ba min.:18 mm; Basic dynamic load rating C:4050 kN; Da min.:620 mm; B5:77 mm;

C:10 mm; Fatigue load limit Pu:0.208 kN; r min.:0.4 mm; Limiting speed:13000 r/min; Fw:8 mm; Basic dynamic load rating C:2.33 kN; D:12 mm; Mass bearing:0.0032 kg; Basic static load rating C0:2.04 kN; Designation bearing:HK 0810.2RS;

B:32.00 mm; d:45.000 mm; Basic Dynamic Radial Load Rating C:34500 N; Basic Static Radial Load Rating Co:34000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:7800 rpm; Grease Speed Rating n1:6000 rpm; Fillet Radius rb:0.30 mm; D:75.0000 mm;

Oil Speed Rating n2:4300 rpm; Basic Dynamic Radial Load Rating C:138000 N; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:3200 rpm; B:58.70 mm; d:65.000 mm; D:140.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:108000 N; Grease Speed Rating n1:3200 rpm;

Accessories:Snap-Ring; Basic Static Radial Load Rating Co:212000 N; Fillet Radius ra:2.50 mm; D:215.0000 mm; Basic Dynamic Radial Load Rating C:194000 N; B:47.00 mm; d:100.000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Oil Speed Rating Open/Shielded n2:3000 rpm;

J min.:234.95 mm; L:330.2 mm; H:192.088 mm; H2:57.15 mm; A:80.963 mm; Basic dynamic load rating C:253 kN; d2:130.175 mm; Mass bearing unit:14.3 kg; da:87.313 mm; J max.:282.575 mm;

H:377.825 mm; h:60.325 mm; Max. speed for Taconite seal:460 r/min; P120°:196 kN; Initial grease fill:1304.1 g; Da:319.999 mm; H2:76.2 mm; P90°:320 kN; ba:75.406 mm; P60°:535 kN;

Da:180 mm; Max. speed for PosiTrac Plus seal:1350 r/min; PG:1/4 NPT; H:217.488 mm; J max.:333.375 mm; J min.:295.275 mm; Bearing:23024 CCK/W33; Appropriate attachment bolt size G:0.75 in; Ca:55.804 mm; Pa:16.7 kN;

Ca:252 mm; Appropriate attachment bolt, rec. tightening torque:3640 N·m; P120°:3100 kN; N:60 mm; End cover:ETS 80; N4 max.:35 mm; L:1120 mm; J:950 mm; ba min.:196 mm; s:30 mm;

Pu:3100 kN; B:180 mm; Grease:5320 kN; d:260 mm; with tapered bore:530 min-1; rs (min):4 mm; Dynamic (Cr):7.5 mm; with cylindrical bore:430 min-1; Static (Cor):13.9 mm; Oil:445.530 kN;

d:60.000 mm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:4800 rpm; B:35.00 mm; Basic Dynamic Radial Load Rating C:108000 N; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:69500 N; Sealed Speed Rating n3:3100 rpm; Fillet Radius ra:2.00 mm; D:150.0000 mm;

Oil Speed Rating Open/Shielded n2:10000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; Accessories:Two Shields & Snap-R; B:16.00 mm; Basic Static Radial Load Rating Co:18000 N; Basic Dynamic Radial Load Rating C:24700 N; Sealed Speed Rating n3:5000 rpm; d:50.000 mm; D:80.0000 mm; Fillet Radius

Recommended diameter for attachment bolts, mm G:12 mm; Fatigue load limit Pu:0.655 kN; J:92 mm; Db:90 mm; Mass bearing unit:0.75 kg; Recommended tightening torque for grub screw:6.5 N·m; A1:17 mm; Thread grub screw G2:5/16-24 UNF; A:35 mm; Housing material:Composite for food a;

Basic Static Radial Load Rating Co:140000 N; Sealed Speed Rating n3:0 rpm; Grease Speed Rating Open/Shielded n1:1800 rpm; d:240.000 mm; B:28.00 mm; Fillet Radius ra:2.00 mm; D:300.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Oil Speed Rating Open/Shielded n2:2200 rpm; Accessories:Without Ac

B:34 mm; Basic static load rating C0:93 kN; Ca max.:8.79 mm; b:3.5 mm; Reference speed:7500 r/min; Da max.:168 mm; Fatigue load limit Pu:3.35 kN; d:100 mm; D3:173.66 mm; ba min.:4 mm;